True but the SMDR Box plugs into the side of the control unit. The boxes were notorious for not working without proper software level. The output is as above,when a station hangs = output.
You need to do three things 1. get an SMDR box that works. 2. Buy a program or write one to collate the output. 3. Get a local tech to set it up (that will be hourly with no known number as to time involved. You could work 3 hrs only to find used box is bad, your plug in port could be bad.
Even if it works right off your in for $400.00.
long payback.
If you already have PIN for LD, what do you want SMDR for???
Gotta have it??? Pay the Ten bucks.
I used to be an Atlas dealer but if you were across the street from me I would not take on the job. It's a no win for any tech. Any problem with
the used / unknown equip and the finger pointing starts.
The pinouts for the cable are in the manual.
If you get the box I hope it works for you.