I added new additional stations to an existing system (COMDIAL J1632 system using 8024S phones). The new stations do not display some of the 8 direct lines the older stations have. The tech guys who installed the initial stations are not helpful with regards to reprogramming the new stations or provision of manuals/password. Please help me out with the following:
1) I need to get a default password to get the reprogramming going. 2) Can I handle the programming from station 10 without using a PC connection? 3) Can I do the programming while the system is still runnning without interrupting normal call operations? 5) I am tapping all the new stations from the lower second output port of the J1632 interchange unit since the upper first output port was used up and I hope my problem has nothing to do with this second port. I have read extensively through your earlier postings and I find them educative. Keep up the good work!!
Thanks in anticipation.