iDCS100 R2 fax problem|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

iDCS100 R2 fax problem #426654 07/11/06 05:02 PM
Joined: Sep 2004 Posts: 395 San Diego, CA. MichaelV OP Member
OP MichaelV Member Joined: Sep 2004 Posts: 395 San Diego, CA.	I have a new customer with a R2 100 ver. 2.44 that is having problems faxing through the switch. They are using PRI and the card is ver. 4.14, which is a new version card that I haven't seen until now. The fax is connected to a 2sli board. The problem is that when they fax through the switch the speed to send/receive is 75-80 seconds per page. On a pots line that they have there its about 20-25 seconds per page. Not sure what to try here as we have lots of customers that fax through samsung's with pri's and no problems.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
iDCS100 R2 fax problem	MichaelV	07/11/06 09:02 PM
Re: iDCS100 R2 fax problem	Old blond hippity hopping Bunnie	07/12/06 12:10 AM
Re: iDCS100 R2 fax problem	phonman123	07/12/06 05:59 PM
Re: iDCS100 R2 fax problem	WRichey	07/12/06 07:23 PM

Moderated by nameless, pvj

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems iDCS100 R2 fax problem