|
|
Joined: Feb 2010
Posts: 3
Member
|
OP
Member
Joined: Feb 2010
Posts: 3 |
*Edited to remove MMC numbers*
Anybody have a programming check list for getting SIP Trunks to work properly? I got them to connect with the SIP provider's server (I get the 'Yes' in "SIP Server Available" field). I also get dial tone when accessing the SIP Trunks via 8501, but I cannot complete any calls properly. I placed the assigned phone number in the DID table as well. Incoming calls get an error message about circuits being busy, and outgoing calls come back into the phone system no matter what I dial. I've tried using the manual to get the incoming & outgoing VOIP digit mmc's set up, but as most of you probably know, those manuals are not always detailed enough.
Any help would be much appreciated.
System is OS7200 v. 4.42a
Eric
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,289
Posts638,795
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
2 members (JBean3329, jsaad),
126
guests, and
395
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|