Here is my problem, I've set in the tool restriction tab the 1 prefix to deny the numbers starting with 1.

I've set in the tool allowance tab 1200 so it can be an allowed exception.

I've set station 206 as COS 2.
I've set COS 2 toll tipe as B.
In tool tipe B i set yes to deny 1 in toll deny table.
In tool type B i set yes to allow 1200 in the toll allow table.


I've set the lcr access digit as 9.

In station 206, i dial 9. I access the lcr.
Then I dial 1200 and it says: Call Restricted.

I am missing something?