I'm using ECLIPSE 2.0.0 09/09/98
with 648 ports and the Att option (among others.)

Would setting the Forward and VMS Plans for a DVA to forward all calls to VMS (even if no box existed) still allow the DVA to work for auto-attendants and to play on-hold messages? I want to prevent unauthorized persons from deleting messages on a DVA, or (worse yet) recording new ones of their own, but still allow the DVAs to perform their intended function. (Obviously, whenever I wanted to change the recordings, I would turn the forwarding off.)

The manual never really discussed that, as far as I can tell (using the Issue F - October 1999 manual).

Yes, it did occur to me to just try it out-- but I hate doing it while the system is in use, and I don't want to think that it's working properly but then run into some strange hitch later.


------------------
We can forgive a child who is afraid of the dark; the real tragedy of life
is when men are afraid of the light.
- Plato

[This message has been edited by Orac (edited June 09, 2005).]

We can forgive a child who is afraid of the dark; the real tragedy of life
is when men are afraid of the light.
- Plato