Hi..Qwest put in a T1 to one of our customers locations recently. The customer site is a construction trailer that will be there over the two years of the project. The problem is, they couldn't get close to the trailerr so they used the closet pedestal they could get to. They then came out of it and did the old "T on-a-stick", (NIU on a post). From there the customer ran his own Cat3 cable to their trailer. This run, (here's the scary part), is around 1500'. I know I shouldn't be going more than 650' but is there a way to put a T1 extender on this circuit to boost the signal? The add'l problem is, there is no power at the NIU location. Thanks