First off, glad to find a MB with this caliber of information. Thanks for the MB.

I have what I hope is a simple problem with a quick and easy fix. We have a old Coral SL system (aka FlexiCom 200?) running at our facility that we are trying to configure to send the extension/caller id of the calling SDT circuit to an analog phone connected to a SLS circuit on our 16SLS card. SDT to SDT works fine and SLS to SDT also works fine. Is this a limitation of the SLS card or have I possibly missed something in the config? I have provided a list of cards in the main cabinet:
Code
CARDS LIST

 shelf#/slot#  p_type     i_type    card_db#   vers/subver  status

     0 / 1     2SKW/  08  NO_CARD  ---        1     33      UNAUTHORIZED
     0 / 2     4TMR/S     4TMR     1          14    35      ACTIVE
     0 / 3     4TMR/S     4TMR     0          14    35      ACTIVE
     0 / 4     16SDT      24SDT    ---        1     20      ACTIVE
     0 / 5     16SLS/H    24SLS    0          1     18      ACTIVE
     0 / 6     4DRCM      4DRM     ---        2     11      ACTIVE
(remainder are empty)

Thanks in advance for any guidance anyone can provide.

Regards,
Joe Avila