OK, here you go. This is for the -DM configuration, but since I doubt you will need A-leads, this should be all that you need:

Dial leads:

OR/BK: Network terminal C with brown switchook lead;

GN: Network terminal F with white switchook lead;

BK: Network terminal RR;

RD/GN and WH: Network terminal R with red switchook lead;

BL: Network terminal B with black handset lead;

WH/BL: Network terminal S (or any blind terminal) with green handset lead and black switchook lead;

RD: Network terminal T (or any blind terminal) with red handset lead;

Other connections:

WH lead from handset: Network terminal GN;

GN lead from switchook: Network terminal L1 with green line cord lead and black ringer lead;

YL and SL leads from switchook: Network terminal L2 with red line cord lead and red ringer lead.

SL lead from ringer coil: Network terminal K;

SL/RD lead from ringer coil: Network terminal A

***Insulate and store the following dial leads separately***

GN/WH
VI
OR


Ed Vaughn, MBSWWYPBX