I have a customer that has a toshiba dk280 connected to a stratagy voicemail system using alog extn ports not smdi. They
also have alog exchange lines.

The issue I have is the stratagy flash is taking about 30 -40 secs to hang up the call after the called party has hung up the call.

Its not a good set up at this site and the issue lies with their precription line which is only a single line that is set to ring an alog ext with an immed divert too vmail along with the reqd follow on id to the mailbox. The line is constantly rAng all the time so obviously they will get engaged alot but just wondered if the clear down could be improved or if iam missing something obvious in the settings. The network provider has said the clear down timer is set to the standard value. I had a look at the settings in the switch and couldnt see anything that jumped out at me. Just looking for any pointers , going back to site tomorrow. Thanks