|
|
Joined: Dec 2011
Posts: 68
Member
|
OP
Member
Joined: Dec 2011
Posts: 68 |
Hi there, have an SV8100 question. I have a customer that we just installed 3 NEC Door phones for. We have 2 PGD adapters on site.
The customer has a regular digital MLT in the lobby. They want the receptionist to be able to dial an access code to activate a relay to unlock the door.
Reading through the hardware and features+specs manual, I can access a General Purpose Relay off of the CP00 or the PGD using a 51 key in 15-07. But the manuals are confusing, as it says General Purpose Relay will not allow the door-unlock feature of the PGD to work.
I'm sure people have done this before -- any tips? Worst case I'll install a door phone up in the LAN Room and just have the reception dial an access code to call the door phone and press recall to activate the relay.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
1 members (nortelvoip),
103
guests, and
350
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|