|
|
Joined: Nov 2013
Posts: 65
Member
|
OP
Member
Joined: Nov 2013
Posts: 65 |
Hello!
I am brand new here so I am just learning my way around. My company has an Electra Elite IPK, with ESIB8 and COIB4 U30. My question is how do we enable the Caller ID. We have been using it without it, but would like to program it. I set up this system but never tried caller ID. Here are my software versions: SP1012/ CPUI = 2.02/ ESIB8 = 1.00/ COID4 = 4.00
Is this the proper software to have CID, and if so, what memory block should I use to set it? I tried earlier, by going off-line, MB7-1, slot 02: COID 4 =05.
Thanks for your help in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
2 members (justbill, JBean3329),
168
guests, and
303
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|