I am installing a XTS-IP system with a flash-8 port voice mail card and I am not able to get the MWI to come on when an ext. has a message in it's box. I have entered the ext. in flash 65-12. Turned on flash 50,B,15 and Flash 50,D,10 set to 0. Do I need to change the MWI codes on and off in the PBX Integration settings. They are set to default-W1:. The MWI will only come on if I reset the system and will clear only with a system reset also.

Last edited by rolls69; 01/27/14 02:26 PM.