|
|
|
|
Joined: Aug 2007
Posts: 15
Member
|
OP
Member
Joined: Aug 2007
Posts: 15 |
Working on an IPK 2 Software release 1.61. I have a DTI 40 ETU in slot 1 of the cabinet. Programming via a telephone as I do not have Web Pro or PC Pro for the IPK. Additionally the manual I have predates this release by a couple of years (Revision 1). The problem is that the programming that I do does not stick. For example in command 10-3-20 I select number 7(NI2) press the TRF key etc., but then go back in and look and all the PRI programming is at default. Do I need a PRT card or what???? One manual sort of says that it can be done on a DTI card... any help would be appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
127
guests, and
323
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
