|
|
|
|
Joined: Nov 2001
Posts: 464 Likes: 1
Member
|
OP
Member
Joined: Nov 2001
Posts: 464 Likes: 1 |
I'm having trouble with loop start lines not releasing. I am getting a disconnect signal, I am using a Time Warner cable modem for the lines.The lines do actually disconnect,but the LED stays red and can not be used. If I pull the bridge clips off, then access the lines, they will release, if the lines are showing busy and I pull the amphenol off the card, they still show busy. No alarms, can't manually release them from the console. I've programmed them for supervised and unsupervised with no change. Any suggestions? Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,283
Posts638,767
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
