Hello all,

Recently swapped out my 408 GS/LS card for one with ID. For some reason, all calls on all lines are showing "No Caller ID" regardless of how long I let it ring.

Click for photo.

I get my phone lines through an array of ATA's connected to my Asterisk box. One two-port Cisco 186, and one two-port Linksys. Caller ID works normally on all of them if I plug in a single line phone or my Partner system.

I did a board renumber when I first installed the card as always, and all of the ports work fine with no trouble.

I tried going into:

System Program > Lines/Trunks > More > GS/LS-ID Delay

It doesn't let me select any line buttons or do anything at this screen.

Any suggestions?

Thanks in advance,

Scott


Tennessee Technology Solutions, LLC | "Business technology solutions reimagined." | (423) 665-9995 | www.423tech.com