|
|
|
|
Joined: May 2005
Posts: 47
Member
|
OP
Member
Joined: May 2005
Posts: 47 |
Team,
About a month ago, our MicroCall system (v2.8) stopped logging calls from our Axxess 8.1 system's OPC Card's RS-232 Interface.
All cables seem to to be connected securely and working. However, Both the ShowCall and MicroCall status window are not updating any counters for Inbound/Outbound Calls off network.
My Question is:
1. What settings can I verify on the Switch (assuming they are under the Reporting Programming Object in DB Studio) should I make sure are flagged/checked to capture inbound/Outbound calls made to our PRI Trunk.
If it's any consequence, our MicroCall file is show as 95% full, if this could be the root cause?
Any help hints would be very great!
Thanks -
Dave
Dave Del Purgatorio | I.T. Team Support
Pacific School of Religion
1798 Scenic Ave.
Berkeley, CA 94709
510.849.8204
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,287
Posts638,784
Members49,766
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, nfcphoneman),
160
guests, and
170
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
