can't call out on copper lines.|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

can't call out on copper lines. #577091 09/05/14 09:27 AM
Joined: Jan 2011 Posts: 116 Little Rock, AR rippenlips OP Member
OP rippenlips Member Joined: Jan 2011 Posts: 116 Little Rock, AR	I have a avaya definity guestworks CMC cabinet. TN747B trunk card in slot 10. I can call all the lines but when they call out they get dead air and goes back to dial tone. The Lec was already onsite and said the lines are fine. I shipped a card to show up today but was curious if anyone knew if it could be anything else i could be over looking? loop start lines.

Avaya IP Office Help & Support Website

Avaya IP Office Help & Support Website

FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Entire Thread
Subject	Posted By	Posted
can't call out on copper lines.	rippenlips	09/05/14 01:27 PM
Re: can't call out on copper lines.	justbill	09/05/14 01:47 PM
Re: can't call out on copper lines.	rippenlips	09/05/14 02:02 PM
Re: can't call out on copper lines.	dexman	09/05/14 08:49 PM
Re: can't call out on copper lines.	rippenlips	10/23/14 09:20 PM

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems can't call out on copper lines.