|
|
|
|
Joined: Oct 2007
Posts: 117
Member
|
OP
Member
Joined: Oct 2007
Posts: 117 |
This is an IP5000 version 2.1, we have 5 IP phones attached. There are about 50 digital endpoints, and they have an PRI for dialing out. ALL of the IP phones have the same issue. When attempting to dial out the call is immediately dropped, the screen goes back to idle. No error tone, no error message on the screen nothing. I have run the DB through the DBTest, it found a couple of little things and cleaned them up. I ran it 3 times. I defaulted the DB and uploaded the cleaned DB. Still the issue continues. The phones are 770.4500. Otherwise the phones operate just fine. Has anyone experienced this issue? I am in favor of replacing the system. Don't think that will be an option.
Thanks for looking and even more so if you have any suggestions.
A+, CTP
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,282
Posts638,763
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
157
guests, and
196
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
