|
|
|
|
Joined: Oct 2008
Posts: 298
Member
|
OP
Member
Joined: Oct 2008
Posts: 298 |
Have a 9100 that was installed in August with PRI. Caller ID worked for a couple months then all of a sudden stopped. Contacted Telco to investigate as no programming had changed on the system. Telco said it was fixed, but still not working. Was speaking with the PRI group today and they confirmed that CID was programmed but still nothing showing up. I have tried taking the name out of the DID tables but changed from the table name to the generic "Line 001" in the display.
Anything off the bat that I could check in programming? CID on PRI typically just works, no magic.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,284
Posts638,772
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
143
guests, and
278
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
