I recently installed an IPOffice 500 v2 Basic Edition Partner Version box. I connected the LAN port on the IPOffice box to a network that has a DHCP server on it. The instruction sheet that comes with the IPOffice box says that its default LAN IP address is 192.168.42.1. I was not able to ping from my PC to that address. Yes I manually set my PC to 192.168.42.99. The instruction sheet also says the IPOffice box will take an address from a DHCP server if one is available on the network. I think that address is in the 10.x.x.x range.

Short of having to connect to the IPOffice box with a serial cable, how can I reset the LAN port of the IPOffice box back to its default value of 192.168.42.1?

I tried disconnecting the IPOffice box from the network and rebooting it, but that does not seem to have reset the LAN port to its default ip address.

Vaya con Dios amigos!
Butch