Hello,

At times, the POTS line that received the incoming call and was transferred to the forwarding station, will not release the call after the call has been terminated. All programming has been confirmed. All works well 90 percent of the time, but only at times, a line will not release after a successful RCF.

The line button Led in question will remain "green" on the forwarding station, and "red" on all other stations, as if in use. At this time, the line is open/dead with no dial tone, and will not release, even by unplugging the line cord on the Board. Rebooting the System releases the line and clears the trouble. This same trouble happens on some of my Rel.6.0 Customers using this feature.

Has anyone else come across this trouble and found any solutions?

Thanks,
Techroy, NJ


techroy