CIX670 doesnt see new expansion cabinet|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

CIX670 doesnt see new expansion cabinet #603003 08/11/16 12:05 AM
Joined: Jun 2010 Posts: 32 ballsie OP Member
OP ballsie Member Joined: Jun 2010 Posts: 32	Rack Mount CIX 670 \| AR5.20 MT055.00 \| BCTU2A/BEXU I just backed up the system, powered down, installed the 3rd cabinet with ribbon cable and ground, set the switch to "exp" and powered back up. I have green lights on all the cabinet paower supplies and there are no cards installed in the 3rd cabinet. Unfortunately, I cannot add anything to that cabinet in eManager. Anyone have a clue as to what could be wrong? I want to add an MIPU to slot 0301 and I get this error: "The entered cabinet/slot value is out of range" Should I initialize? Last edited by ballsie; 08/11/16 12:06 AM.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
CIX670 doesnt see new expansion cabinet	ballsie	08/11/16 04:05 AM
Re: CIX670 doesnt see new expansion cabinet	newtecky	08/11/16 08:38 AM
Re: CIX670 doesnt see new expansion cabinet	ballsie	08/11/16 01:56 PM
Re: CIX670 doesnt see new expansion cabinet	MarcO Qc	08/23/16 01:09 PM
Re: CIX670 doesnt see new expansion cabinet	newtecky	02/08/17 08:58 AM
Re: CIX670 doesnt see new expansion cabinet	newtecky	02/09/17 07:35 AM

Moderated by Carlos#1, phonemeister

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Toshiba Telephones & Systems CIX670 doesnt see new expansion cabinet