Do you have pgm 179 set to allow group 5 as outgoing when on co group 1?

When there is CO transit call, transfer options can be set separately to each CO groups.

Set this thru pc admin not from a set.

You only want to enable this for group 1 as incoming and group 5 as outgoing in admin pgm. If you zone to many groups the system will try to send a call thru a vacant one and nothing good is going to happen. So first group range is 1-1 and second group is 5-5 and ALL other groups should be disabled, and make sure your extensions have access to both groups in programming as well.


Last edited by Derrick; 03/17/17 06:37 PM.

www.myrandomviews
"Old phone guys never die, they just get locked in some closet with an old phone system and forgotten about"

Retired, taking photographs and hoping to fly one of my many kites.