Trying to get a new B179 conference phone to work on an IPO 9.1.9 system. I do have the licensing required; with the issue I'm having I don't believe I'm even getting to that point.

From the factory firmware, it DCHPs from the IPO and loads new firmware from the IPO. Upon reboot, it will not DHCP; if I set up a static address on the B179, I still cannot get into the web interface nor ping it. If I revert back to the factory firmware and configure it as a static IP, I can access the web interface. I've loaded v2.4.2.12 on the unit manually using the web interface but this also causes the networking capability of the B179 to stop functioning.

I'm hoping someone has had a similar experience and knows the way to resolve it.