All,
I have a client with an NEC Aspire system using IP phones and a PRI from Spirit Communications using AT&T lines.
We've been chasing erratic dropped calls for months. We replaced the PoE switch that was in place that was on its way out that was contributing to issues, but the users are still complaining of dropped calls. I've been running a PRI debug for a few weeks so I can look at completion codes when users report dropped calls.
I'm trying to determine whether users are blaming people dropping calls on cell phones on us or if there's an actual hardware issue here. This is an old phone system, and most of the phones are date stamped 2003 - 2005.
This message persists in the debug, what is it?
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 341DH
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 341EH
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 341FH
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 3420H
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 3421H
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 3422H
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 3423H
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 3424H
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 3425H
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 3426H
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
** Timeout !! waiting unstable during over 3 seconds.. **
PORT: 3427H
STATUS=032EH
CALL_MEM=0000H, HOLD_MEM=0000H,
ANS CLWT : off
CLWT FLAG: off
I'd very much like to get this issue resolved as the client is tired of it, and so am I.
Thanks!
