|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
BCM 450. One analog station will occasionally send another extension (usually the same couple of extensions) a "you have a message" indication. The analog station has no jumper on it. There is nothing connected. I've changed the name of the extension, and the new name shows up at the called extension. I've changed the DN and it still does this. Also rebooted with a power cycle. Still getting the phantom message indication.
I don't see anything in DN's or target lines with the old or new dn. Any thoughts on where this is coming from? Thank you.
Jim
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,287
Posts638,793
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
135
guests, and
410
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|