We are Going from a C/E processor to a E/F processor. I go through the steps of the upgrade from within DKAdmin. Then I get to the part where I have to switch the processor cards. I put in the new cards, turn the system back on and I immediately notice 2 things. 1) Phones come on but I dont have a dial tone on any of them just the date shows. 2) The ports are different. Like 205 chenged to 105.
DKAdmin will no longer connect after I connect the new processors and the upgrade fails. Another strange thing is that even thought I dont have a dial tone I can connect to the programing menu using the *#*# . I feel im doing something wrong but im not sure what. Any help would be great.