|
|
|
|
Joined: Apr 2005
Posts: 289 Likes: 1
Member
|
OP
Member
Joined: Apr 2005
Posts: 289 Likes: 1 |
After a CPU is defaulted I believe the procedure is to then set the system size (Trunks, Exts) via the first port, x201 by pressing FEAT #1 (password). Experimenting with some CPUs back at the shop after defaulting I've found FEAT #1 does nothing on x201. I then load the hardware config only, reset, then load everything. Then the system was running with the database. After that's done FEAT #1 does get me into config - at that point x201 is configured as the attendant. I wonder then is it port 1 where the system size must be set, or is it the attendant port? Seems like there is no attendant port when defaulted, unless it's somewhere other than logical port 1.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Forums84
Topics94,288
Posts638,794
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
136
guests, and
412
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
