|
|
Joined: Feb 2015
Posts: 5
Member
|
OP
Member
Joined: Feb 2015
Posts: 5 |
Hi Guys,
Hoping someone can help.
I am having to install an SV9100 with Q-Sig via PRTA cards to an Avaya PABX. Also SIP trunks to an NEC BX SBC.
Basically I need to know how to assign/program the PRTA cards for qsig. Does anyone have any info on how to do this?
Once I have the Qsig up and running and the SIP trunks working to the SBC, I need to route calls between both sets of trunks. In short, if a call comes in on the Q-Sig trunks, it will need to automatically route out the SIP trunks and vice versa. Something like an automatic Trunk to Trunk Transfer? I dont care what has been dialled, i just need to send what comes in on the Q-SIG Trunks, out the SIP Trunks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Entire Thread
|
NEC SV9100 Q-SIG
|
ctownend
|
01/22/18 12:39 AM
|
|
Forums84
Topics94,262
Posts638,696
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|