Have a customer with a Stratagy voicebrick (Flash) voicemail that quit taking messages. The Supervisor mailbox says there is 0% free space.

I picked up a used voicebrick but the passwords are changed so that did not work out. I do not have the programming software and cannot seem to find it to download,. I assume it needs an older pc to run (DOS, maybe or at least XP)

I watch the serial port on bootup and get the following:

5.41.15.1507;}\viewkind4\uc1\pard\f0\fs20 Datalight miniBIOS (R) v6.22 (Revision 3.14) \par
Copyright (c) 1989-1997 Datalight, Inc. \par
Copyright (c) 1993-1997 Analogical Systems. \par
Copyright (c) 1997-1998 Dialogic Corporation. Build (1.05.006) \par
\par
Tested RAM 002048K \par
\par
\par
ROM-DOS boot options: \par
\par
1) Normal Start-Up (Flash drive boot) \par
2) Exit to DOS (ROM drive boot) \par
\par
Choose option: 1 \par
Starting ROM-DOS... \par
\par
HIMEM v6.22 (Revision 2.60.03) \par
Copyright (c) 1989-1997 Datalight, Inc. \par
Using PS2 A20 Control (ON) \par
32 XMS handles available. \par
Minimum HMA usage is 0K. \par
\par
EMM386 v6.22 (Revision 2.60.03) \par
Copyright (c) 1989-1997 Datalight, Inc. \par
\par
Dialogic VoiceBrick Downloader Version 4.41 \par
Copyright (c) 1992-1998 by Dialogic Corp. \par
\par
Using C:\\DIALOGIC\\DIALOGIC.CFG to configure Dialogic Boards \par
\par
System Download ................................... \par
\par
VoiceBrick (addr DE00) Download .. BRICK Firmware Version 6.30 Special 0.03 \par
\par
1 Dialogic Board Successfully Installed \par
Dialogic DIALOG/4x,AMX/8x Installable Device Driver \par
v4.31 (Build 0008) \par
Copyright (c) 1985-1998, by Dialogic Corp. \par
D/41D, 4 channels, segment DE00, version 63, JP8 installed \par
EMS board installed at memory segment: C000 \par
Base memory segment: DE00H \par
384k of EMS memory allocated for channel buffers. \par
0 bytes of memory allocated for silence buffers. \par
1 DIALOG/41 installed. \par
Installable Device Driver Server resident at software interrupt 48H \par
C:\\>TONEDNLD -H5 -R -Fpbx.tsf \par
NAME: TONEDNLD \par
Ver. 1.02 \par
\par
Reading Data File: pbx.tsf \par
Starting D40DRV \par
Sending New ToneSet Data To Driver \par
New ToneSet Data Successfully Sent To D40drv \par
\par
C:\\>\\fixdate \par
\par
C:\\>if exist c:\\power.flg goto POWER_OUT \par
\par
C:\\>rem POWER_OUT \par
\par
C:\\>del c:\\*.flg \par
\par
C:\\>rem NO_POWER_OUT \par
\par
C:\\>copy c:\\stratagy.bat c:\\power.flg \par
C:\\STRATAGY.BAT \par
1 File(s) copied \par
\par
C:\\>if exist c:\\stratagy\\archive\\original\\autoexec.bat goto CK_RESTCONF \par
\par
C:\\>rem CK_RESTCONF \par
\par
C:\\>cd \\stratagy \par
\par
C:\\STRATAGY>if exist c:\\timeout.flg goto RESTCONF \par
\par
C:\\STRATAGY>del yes.* \par
File not found \par
\par
C:\\STRATAGY>copy c:\\stratagy.bat c:\\timeout.flg \par
C:\\STRATAGY.BAT \par
1 File(s) copied \par
\par
C:\\STRATAGY>rem GO\par
\par
C:\\STRATAGY>if exist c:\\dotrace.flg goto DOTRACE\par
\par
C:\\STRATAGY>watchdog\par
Copyright (c) 1991-1995. All rights reserved.\par
Scanning C:\par
Checking reference database... DONE.\par
Scanning voice files C:\\VOX.DB\\3F\\00 -> C:\\VOX.DB\\3F\\FF (ROUND: 1) DONE.\par
Scanning voice files C:\\VOX.DB\\7F\\00 -> C:\\VOX.DB\\7F\\FF (ROUND: 2) DONE.\par
Scanning voice files C:\\VOX.DB\\BF\\00 -> C:\\VOX.DB\\BF\\FF (ROUND: 3) DONE.\par
Scanning voice files C:\\VOX.DB\\FF\\00 -> C:\\VOX.DB\\FF\\FF (ROUND: 4) DONE.\par
Scanning mailboxes (28 mailboxes) DONE.\par
CKDB EXECUTION SUMMARY\par
* 0 messages with 0 references to 0 voice files.\par
* 0 errors (0 repaired).\par
\par
STRATAGY Mar 4 1999 17:17:13\par
Copyright (c) 1998 Toshiba America Information Systems, Inc.\par
Portions copyright (c) 1991-1995 The Automatic Answer, Inc.\par
All Rights Reserved.\par
Scanning VOX files on C:...done.\par[/i]
Scanning mailboxes on C:...done.\par[/color][/i]




Not sure which version of the programmer I need but any help would be welcomed. I did have the software at one time but that pc is long gone...

Randy