|
|
Joined: Aug 2011
Posts: 219
Member
|
OP
Member
Joined: Aug 2011
Posts: 219 |
I have connected SIP lines onto an OS7400 ver. 4.98. on outgoing calls, it starts ringing before it connects to the distant end. When the called party is engaged it displays OPP BUSY but does not play the recorded message from the distant exchange does not play, worse on an analogue extension it just gives out a tone.
When the called party is not reachable the distant exchange plays a NOT REACHABLE RECORDING but the Samsung keyset shows only an UNAVAILABLE message on the display and analogue extensions play-out a tone similar to the one for the above case.
When you put the same SIP line on a soft-phone it performs as expected, playing the relevant recorded messages from the distant exchange. I am missing where to configure so as the OS7400 to behave the same, please assist. It seems the dialed digits on samsung are sent ENBLOCK, is there somewhere I can set them to be sent sequentially?
heads up
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,287
Posts638,791
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
150
guests, and
178
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|