Need help setting up assigning a Trunk Group to a SIP channel.|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Need help setting up assigning a Trunk Group to a SIP channel. #619100 04/19/18 04:44 PM
Joined: Apr 2018 Posts: 10 Wisconsin iDxReArmored OP Member
OP iDxReArmored Member Joined: Apr 2018 Posts: 10 Wisconsin	I have a Panasonic KX-NCP500 here with a virtual SIP trunk to another PBX. I'm trying to program it so I can make a trunk group and assign it to the SIP channel. For example I can dial 8 then the trunk group then the external PBX extension number IE 802204( Meaning the 204 is the extension I'm trying to reach) I'm not sure if I am asking the correct question to accomplish this task as I am new to the Panasonic systems. Thanks!

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Entire Thread
Subject	Posted By	Posted
Need help setting up assigning a Trunk Group to a SIP channel.	iDxReArmored	04/19/18 08:44 PM
Re: Need help setting up assigning a Trunk Group to a SIP channel.	OBT	04/20/18 09:54 PM
Re: Need help setting up assigning a Trunk Group to a SIP channel.	iDxReArmored	04/25/18 05:33 PM

Moderated by Carl Navarro, OBT

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Panasonic Telephones & Systems Need help setting up assigning a Trunk Group to a SIP channel.