|
|
Joined: Oct 2006
Posts: 1,384 Likes: 6
Member
|
OP
Member
Joined: Oct 2006
Posts: 1,384 Likes: 6 |
SV9100 with UC Suite. Things were working fine. Then the customer changed out a handful of computers. I loaded the UC Suite desktop software on the new pc's and UC came up fine, except for the part where the user right clicks on a call in the call log to call them back. You can call back an internal intercom number, but not an external phone number.
When I tried it, the phone display showed only the first number was dialed. When the system recognized no more digits were coming, it hung up. The call log showed an outgoing call with only the first three numbers.
I can't find any setting I might have missed that would fix this. During the setup, it asked if I wanted to be able to dial a number from a web page, and i said yes. One user uses this feature a lot, so I know it worked before. Any thoughts on what I'm missing?
Thank you. Jim
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,289
Posts638,795
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|