|
|
Joined: Mar 2019
Posts: 8
Member
|
OP
Member
Joined: Mar 2019
Posts: 8 |
Hello Toshiba gurus!
I've got a CIX 670 system with an IES-16 that has been in system for years. Some of the programming got lost, and I've been banging my head against the wall on this.
There is a single mailbox (504) that after hours callers have the option to leave a message for the next business day. They listen to the company greeting, then press 2 to leave the message and it goes to MB 504. That part of it is working. The customer has 2 reception phones where they check these messages. I set up phantom DN and Message Wait buttons on each phone (505 and 506) for the messages to be copied to. That also is working.
Now, the customer is telling me that previously, messages deleted from one phone also deleted from the other. It sounds to me like both phones were accessing MB504 if that's what was really happening. I've never run into a scenario like this.
Any ideas?
**Bonus problem: The message wait LED stopped working for the phantom MW on 505 and 506. I had the customer use #409 to cancel the MW light for messages that were no longer there. Could that have anything to do with it?
Thanks in advance for any ideas.
Anyone with the solution/s will be my hero.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,282
Posts638,758
Members49,764
|
Most Online5,661 May 23rd, 2018
|
|
2 members (mongo5150, Toner),
151
guests, and
104
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|