|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
You should leave OAM alone.
Just a quick basic one as I do not have a cheat sheet.
For separate network get a PoE Switch Change IP address of BCM (through set usually works best (F9*8))
Keycodes -Keycodes required for IP sets "IP Client" --If you get "Keycode required" and know you have enough then Deregister any unused IP sets in IP Resources/IP Terminal Details.
Telephony Resources/IP Sets -Enable Registration -Set password -Choose if to Auto Assign DN or not -Put in a Company name in Logo -In IP Terminal Details deregister any unused sets.
Data Service/DHCP Server -DHCP Server is IP Phones Only -"localdomain" or IP Address of BCM IP terminal DHCP Option IP Address of BCM Port BCM Port # 7000 Address Range (if needed)
IP Sets -Enter Network setup and select Auto and check only these boxes to be editable: If you want DHCP only: ---DHCP Enable
If you want to enter static address's then check only boxes: S1: Port: Retry: Do same with S2 (or if another BCM on the network then you could add it as the S2 as a backup if S1 is down)
Now press Config to configure those check boxes: For DHCP enable
For Static: S1: BCM IP address Port: 7000 Retry: 5 or so.
Hit Apply and set will reboot.
Somebody else maybe can chime in to correct or add.
I am basing this on a BCM R6 with 1100 series sets.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,287
Posts638,793
Members49,767
|
Most Online5,661 May 23rd, 2018
|
|
1 members (teleco),
99
guests, and
400
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|