So here is the scoop :
We purchased an Axxess system from a company that went out of business. They had four incoming lines ... we have four incoming lines. Should be as simple as punching down the lines and stations and then using one of the stations to reprogram voicemail, etc. BUT ... when I did this, I got nothing on the stations (no display). The phone system I'm replacing is a Meridian Norstar. The build-out of the Axxess System is as follows :
Power 550.0121
Slot-1 DKSC16+ Station Card
Slot-6 LSC Loop Card
Slot-7 EVMC 550.5030 AJ Voice Mail Card
CPC 550.2030 AZ Processor Card

All Cards go green after power-up.
This is the first install I have done of an Inter-tel Axxess and I saw someones post about using the outer pair ... please tell me this is not the issue.