Hey guy's,
Vertical/ Vodavi guy here needing a little refresher on an old Nortel ICS. It's been 15 years since I worked on one of these and by looking at the manual it brought back a lot of memories, but not enough. I can't remember if I need to program from a certain station or stations. I am trying to do something that should be fairly simple. The customer currently has 3 lines and 6 stations. The 3rd line is a fax line. They are adding a 3rd line to hunt with the 1st 2 lines and want to move the fax to line 4. They currently have the 1st 3 lines and then a pickup key (where line 4 will be) on the sets. I need to program the 4th button to be line 4 on all sets. I then need to program line 3 to ring on several sets. So my my questions are as follows...
1- Do I need to program from any particular set?
2- Do I program the buttons under "terminals and sets"
3- Do I program the ringing under "terminals and sets" or somewhere else?
4- I know I need the program template overlay and they have the NT8B27 and 7316E phones. Any other tips appreciated. Thanks!

"I thought I was wrong once, but I was mistaken"