It's been so long, I just googled it. 6 stations per card!! (hazy memory had 8) And yes, only one fuse for the whole card.

I started carrying a pair of fiberglass long nose pliers for bridge clips on the blocks, and a fuse insertion tool to replace the fuses without pulling the board.

Yeah, had to pound into the guys to terminate the jacks normally and reverse the jumper at the backboard, so didn't have to think about if it was an amphenol to modular adapter at the end of an old 25 pair run or a 3 pair cable on a jack.

Last edited by Touch Tone Tommy; 07/22/20 05:13 PM. Reason: CRS - Can't Remember Sh*t