|
|
Joined: Mar 2012
Posts: 109
Member
|
OP
Member
Joined: Mar 2012
Posts: 109 |
Hopefully this will be my last post for a bit, everything else is working perfectly on this OS100 system I'm reviving. Thanks to nameless and PVJ for your help so far.
Only trunk is a PRI. Protocol type is NI2 and every channel is set for NI2 in mmc 430. Only getting caller ID number. No name. I see "No CLI name" on line 1, and the calling number on line 2 of the display. The name is definitely being sent (tested using an Avaya IP Office). I'm looking through other mmc's for clues but not finding anything.
MCP is running 2.69. TEPRI card is running firmware version 1.05.
Any ideas?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,287
Posts638,784
Members49,766
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
161
guests, and
161
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|