|
|
Joined: Mar 2001
Posts: 320
Member
|
OP
Member
Joined: Mar 2001
Posts: 320 |
trying to help out a scout camp with their sx100, want to do a complete default and start over, system seems to have some ghosts.
it's been a while!!
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
I have the manuals here for generic 216 and 217. What do you have? Do you have the console overlay and a console?
mark
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
What is your software level? 216 or 217? 216 would have 2 cpu type cards. 217 would just have 1. Reset to default involves the scanner card & a console.
|
|
|
|
|
Joined: Mar 2001
Posts: 320
Member
|
|
OP
Member
Joined: Mar 2001
Posts: 320 |
software is 217, i have the system on my bench, overlay & console.
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
Set the thumbwheel switches on the tone control card to X=the console you are using (0-1-2) I think 0 is the maintenence port.
Press lamp test
press next
set the thumbwheel to
press config/init
press enter
press reset button on the scanner card
system is reset and removed from the programming mode
you are now at ground zero.
mark
[This message has been edited by markk (edited August 10, 2004).]
|
|
|
|
Forums84
Topics93,884
Posts637,026
Members49,676
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (jsaad),
81
guests, and
24
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
