|
|
Joined: Apr 2005
Posts: 3
Member
|
OP
Member
Joined: Apr 2005
Posts: 3 |
I have a SX200 on a ship. On this ship, we have 4 incoming trunks from land lines. Those land lines are connected to a ped on the pier. Then, we have 3 satellite phones and one cell phone hooked up to the PBX as trunks for at sea use.
One satellite phone isn't working correctly. It is an Irridium IMF-1000 from Eurocom. It dials out off the PBX, but doesn't ring the PBX phones. It is a programming issue because it worked before I reprogrammed the PBX. All other trunks ring the PBX phones without issue.
Can anyone give me a word of advice on how to program the PBX to accept the irridium's generated ring and send it to the PBX phones?
Thanks in advance for your help.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2005
Posts: 26
Member
|
|
Member
Joined: Apr 2005
Posts: 26 |
If it worked before , than it is not a hardware problem .
The trunk is programed as D.I.S.A. trunk or it has as answer point an PBX phone ?
I advice you to switch another trunk with this one an see if the problem persist than you're sure that is a CDE problem .
If is a CDE problem I advice you to check the Interconect restrictions between the trunk and PBX phone (that are depending of sense and you can have from a PBX phone outgoing acces to a trunk but it can't ring the PBX phone).
|
|
|
|
Forums84
Topics93,967
Posts637,414
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
