web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Joined: Jul 2006
Posts: 82
starion Offline OP
Member
OP Offline
Member
Joined: Jul 2006
Posts: 82
I have a CMP Call-Extend auto-attendant that I want to pick up after 3 or 4 rings during the day and all the time during the night. The ports on the CMP are extensions 278 and 280.

When I put the system into night mode, it does indeed go to the auto-attendant as it should, but I cannot find in the programming where I would set those extensions up for forwarding during the day.

As a side note, the auto-attendant during the day thing USED to work, but stopped some time in the last year or so.

I realize that 278 and 280 are probably set up as members of a hunt group, then the night ringing is set to ring the hunt group. However, I tried to find where this happens, so I could duplicate the night setup to the day - no success.

I have read through the Mitel programming guide until my eyes are about to pop. Can anyone point me in a direction?

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Sep 2005
Posts: 2,049
Member
Offline
Member
Joined: Sep 2005
Posts: 2,049
There are lots of Techs here with SX50 knowledge , just hold on 1 of them will answer questions !


Let It Be , I live in a Yellow Submarine . SCCE
Joined: Sep 2005
Posts: 2,049
Member
Offline
Member
Joined: Sep 2005
Posts: 2,049
go to command 100 make sure the the bits are set like this .

082223xxx
with xxx being the three digit number of yuor hunt group could be 161-166
Hope this helps .


Let It Be , I live in a Yellow Submarine . SCCE
Joined: Oct 2004
Posts: 1,057
Member
****
Offline
Member
****
Joined: Oct 2004
Posts: 1,057
OBTW sounds like he's got it right. The XXX in his example should be the same as the XXX (bits C,D,E) you used in register 5 for the trunk programs (Night service ring to destination).


www.ResaleSystems.com 24 x 7 Mitel Parts and Free Tech Support
Joined: Sep 2005
Posts: 2,049
Member
Offline
Member
Joined: Sep 2005
Posts: 2,049
Thanks 55
I borrowed an SX50 handbook . I don't work on um . I am a SX2000/3300 Man ! Yep be smart check console and trunks !


Let It Be , I live in a Yellow Submarine . SCCE
Joined: Jul 2006
Posts: 82
starion Offline OP
Member
OP Offline
Member
Joined: Jul 2006
Posts: 82
Okay, here's what I did:

Set the bits on command 100 to 082223161.

From what I read in the manual, command 100, register 08 is the overflow control. I don't think this is really what we want. Here's why I think that:

When an outside line calls in, the console rings for 20 seconds, then goes into overflow, which then forwards to group 161. This is fine except it sets the overflow mode to on, and all subsequent calls drop straight to group 161. When you push the overflow button on the console, you have taken it out of overflow mode, and it works fine for the first unanswered incoming call.

What is desired is a busy/noanswer forward to group 161 that doesn't require the operator to reset the overflow mode each time. Or can the overflow mode be automatically reset each time or after a timeout?

Joined: Nov 2002
Posts: 632
Member
Offline
Member
Joined: Nov 2002
Posts: 632
If i remember right i think you can set up an alternate answer point.

Joined: Nov 2002
Posts: 632
Member
Offline
Member
Joined: Nov 2002
Posts: 632
Call CMP call extend support, garret will probably be the one,I think you can set it upas you wish depending on which version software you have.800-245-9933

Joined: Jul 2006
Posts: 82
starion Offline OP
Member
OP Offline
Member
Joined: Jul 2006
Posts: 82
Sheesh....I've got all the CMP stuff here....I didn't even think to look at their setup guide for the Mitel.... :scratch:

Joined: Nov 2002
Posts: 632
Member
Offline
Member
Joined: Nov 2002
Posts: 632
There is some Mitel setup tips on their website at WWW.callmgmtprod.com

Page 1 of 2 1 2

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,709 CTX100 install
186,795 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 12
TDKs79 8
teleco 4
Who's Online Now
1 members (Toner), 115 guests, and 232 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5