web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 3 1 2 3
#105828 05/07/07 04:09 AM
Joined: Apr 2007
Posts: 339
Member
Offline
Member
Joined: Apr 2007
Posts: 339
if you lift the jumper off coming out of the SX200
on that station and the locked goes away it is the wiring, set etc., if locked stays on possible line card or software. Lifting the jumper will prove the trouble
"in or out".

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

#105829 05/07/07 03:39 PM
Joined: Feb 2007
Posts: 2,473
Member
Offline
Member
Joined: Feb 2007
Posts: 2,473
You can try to pull card out with power on and see or that is going to fix your problem. make sure that SL doesn't hooked up to Digital port.

#105830 05/08/07 01:01 AM
Joined: Nov 2006
Posts: 196
Member
Offline
Member
Joined: Nov 2006
Posts: 196
Laundryboy, take telephoneguy's advice... (starting to sound like a comic book here)... a lockout is usually caused by a physical problem in the wiring. If you're a maintenance guy being asked to fix a phone problem, do the basics like checking that all the cords are plugged in properly, replacing the line cord, replacing the phone, maybe even inspect/replace the jack. Beyond that, you need to tell your manager that you need to get a phone technician involved. Unless you really know what you're doing, messing around with the cross-connect or getting into the system programming can cause you a lot more problems than you'll probably solve.

JMTC


Harry at Telecom Equipment & Consulting
Specializing in Mitel systems for the Hotel/Motel industry
www.TECHarry.com
#105831 05/08/07 02:07 PM
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
*****
Offline
RIP Moderator-Mitel, Panasonic
*****
Joined: Dec 2005
Posts: 7,056
What Westerntelephone, telephoneguy and TECHarry said, to the Nth Degree. You are going to spend WWWAAAAYYYY more money fixin' whatever you mess up, than the service call would have originally cost. No offense meant, but guy you are over your head here. Change the jack(s) in the room, leave the phone(s) unplugged and see what happens. If it is still locked, YOU SHOULD STOP. John C.


When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
#105832 05/08/07 04:36 PM
Joined: May 2005
Posts: 1,006
Member
Offline
Member
Joined: May 2005
Posts: 1,006
Ok, guys. I say enough is enough....these people get on this board looking for quick fixes from Patel Motel. If they don't want to call a tech, which I think is what we make a living doing, then I say let them roll the dice. Pop a card out, reset the system, screw with the programming, and when they're finally at their wit's end, call the person they should have called in the beginning.. the pro, hey, by the way, how do you unstop a tiolet when the roots are invading my pipes? Any cheap suggestions? Hey- my air conditioning isn't working in room 112... it was working before the phone guy got here...jjeeeezzz

#105833 05/09/07 01:40 PM
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
*****
Offline
RIP Moderator-Mitel, Panasonic
*****
Joined: Dec 2005
Posts: 7,056
Bitter, bitter, bitter. Just let it allllll out WT. We're here to hold your hand. smile Unfortunately, your point(s) are valid. John C.


When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
#105834 05/10/07 03:08 PM
Joined: May 2005
Posts: 1,006
Member
Offline
Member
Joined: May 2005
Posts: 1,006
Anyone know how to tie a frayed not?

#105835 05/12/07 05:57 AM
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
*****
Offline
RIP Moderator-Mitel, Panasonic
*****
Joined: Dec 2005
Posts: 7,056
I have to assume you would like to hang somebody and give them a chance to survive so you can only be charged with attempted or successful manslaughter, as opposed to murder? Yourself, me, or laundryboy? (I won't rat you out) smile John C.


When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
#105836 05/14/07 05:18 AM
Joined: May 2005
Posts: 1,006
Member
Offline
Member
Joined: May 2005
Posts: 1,006
Afraid not.

#105837 05/14/07 11:40 AM
Joined: May 2005
Posts: 1,006
Member
Offline
Member
Joined: May 2005
Posts: 1,006
Yes

Page 2 of 3 1 2 3

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,288
Posts638,794
Members49,767
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
212,349 Shoretel
188,999 CTX100 install
187,390 1a2 system
Newest Members
Robbks, A2A Networks, James D., Nadisale, andreww
49,767 Registered Users
Top Posters(30 Days)
Toner 23
teleco 7
dexman 5
dans 4
Who's Online Now
1 members (Ashley), 114 guests, and 399 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5