Phone Systems


Previous Thread
Next Thread
Print Thread
Rate This Thread
Page 2 of 2 1 2
#105966 - 06/28/07 04:49 PM Re: Mitel sx-50 Covoice  
Joined: Jun 2007
Posts: 7
katboss Offline
Member
katboss  Offline
Member

Joined: Jun 2007
Posts: 7
Colorado
i have traced it to ports on the card is there a way to reinitialize just ports on the cards

Mitel search for systems, cards, phones, software, manuals and repairs!
Mitel Equipment Search
Mitel Superset 4025 $35
#105967 - 06/28/07 06:55 PM Re: Mitel sx-50 Covoice  
Joined: Feb 2007
Posts: 2,474
vad60 Offline
Member
vad60  Offline
Member

Joined: Feb 2007
Posts: 2,474
new york, new jersey
#982 is a default code to see extension status but you have to reset the system or card(with power) to reset port.

#105968 - 06/29/07 04:37 PM Re: Mitel sx-50 Covoice  
Joined: Dec 2005
Posts: 6,264
Lightninghorse Offline
Moderator-Mitel, Panasonic
Lightninghorse  Offline
Moderator-Mitel, Panasonic
*****

Joined: Dec 2005
Posts: 6,264
Fayetteville, NC
Vad60, I have no experience with the covoice, but the VM's I have put on 50's didn't use abbr dial. Are you thinking about 200D/lite/etc? John C.


When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
#105969 - 06/29/07 05:44 PM Re: Mitel sx-50 Covoice  
Joined: Feb 2007
Posts: 2,474
vad60 Offline
Member
vad60  Offline
Member

Joined: Feb 2007
Posts: 2,474
new york, new jersey
No John, I am talking about single line integration when you are looping SL ports with trunks to provide DTMF for VM. For some reason I think it is not digital integration but maybe I am wrong.

#105970 - 06/30/07 10:43 AM Re: Mitel sx-50 Covoice  
Joined: Dec 2005
Posts: 6,264
Lightninghorse Offline
Moderator-Mitel, Panasonic
Lightninghorse  Offline
Moderator-Mitel, Panasonic
*****

Joined: Dec 2005
Posts: 6,264
Fayetteville, NC
VAD:OK, now I've got to go find some co-voice manuals on the web so I can bone up on this form of integration for a 50. I've always used COV! Thanks a lot!, I think. smile John C.


When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
#105971 - 06/30/07 12:48 PM Re: Mitel sx-50 Covoice  
Joined: May 2005
Posts: 941
westerntelephone Offline
Member
westerntelephone  Offline
Member

Joined: May 2005
Posts: 941
Idaho Falls, Idaho USA
The COVoice does use COV! It was designed specifically for the Mitel line. Check the name again.

#105972 - 07/11/07 07:23 PM Re: Mitel sx-50 Covoice  
Joined: Aug 2005
Posts: 2,135
telephoneguy Offline
Member
telephoneguy  Offline
Member

Joined: Aug 2005
Posts: 2,135
salinas, CA, USA
Sorry, VAD, I think you're confused. Western is right, COVoice is on COV ports.

KAtboss, go to command 110 and check the call forward code for busy/no answer (usually 55 or 56, I think). Then, let's say that the VM pilot is 350 and the CF BNA code is 56. You would go off-hook on the extensions that don't work, and dial 56 350 (you'll hear a confirmation tone, then dial tone again). Hang up. Test.

On Mitel, the Call-forward setting is not affected by programming, so your cloned phones might or might not get the same call forward. You have to set it and clear it from the extension, using the code. Hint: Use your buttset on the blocks in the phone room, and save yourself a lot of walking.

#105973 - 07/18/07 04:34 AM Re: Mitel sx-50 Covoice  
Joined: Oct 2005
Posts: 1,096
county wide Offline
Member
county wide  Offline
Member

Joined: Oct 2005
Posts: 1,096
The Berkshires ,Massachusetts
double check and make sure all vm port exts have been defined and ext and mail box forms and make sure each exist in COVoice on problem ext's
also .

did you ring all ports in c1 c2 screens
from a problem ext and see if all ports receive
follow on alpha/digits "have you tried to
talk to VSR I have called in and they have helped in the past with out paying ask nicely worked for me"

#105974 - 07/28/07 08:13 AM Re: Mitel sx-50 Covoice  
Joined: Oct 2005
Posts: 1,096
county wide Offline
Member
county wide  Offline
Member

Joined: Oct 2005
Posts: 1,096
The Berkshires ,Massachusetts
did you solve your problem

Page 2 of 2 1 2

Moderated by  DrPbx 

Refurbished Phones & Equipment Search
Shout Box
FREE DESI Labeling System Software!
FREE DESI Labeling Software - Click Here!
Most Recent 5 Post
7400 Cisco Anyconnect VPN
by mfecko. 08/15/18 11:54 AM
Just got these in and want sold,
by usedphones. 08/14/18 10:41 PM
august 15
by dude. 08/13/18 11:12 PM
Anyone have an Gen 2 ESI 482 Card?
by upstateny. 08/13/18 08:11 PM
5000-4707 - ESI 30D Business Phone
by ThePhoneConnection. 08/13/18 04:11 PM
Who's Online Now
54 registered members (Test-ok, Why Me!!!, newtecky, pbogi, paulw, pdxjim911, hbiss, pvj, jkmartin, Mercenary Roadie, brokeda, justbill, skip555, Silversam, Yoda, Carlos#1, Derrick, FSTC, nameless, dexman, JBean3329, Steve M, Professor Shadow, usedphones, michaelg, Touch Tone Tommy, phonemeister, mbhydro, SSPhone, dwflood, upstateny, VIBob, Coral Tech, barnito, Daniel, seafort, BTS01, mike b, jab1780, NateBates, Ruben, vicbob, dude, Carl Navarro, RedBul, Allen Wesley, mfecko, gdtm, oobie, DBWann, Bob Johnson SGF, John Olden, ffej010, 1 invisible), 1,008 guests, and 828 spiders.
Key: Admin, Global Mod, Mod
Tech Support Line 1.800.766.3425
Over the Phone Tech Support for your Phones and Business Phone Systems
Popular Topics(Views)
Newest Members
John Olden, Michael Guin, Southernphoneman, YDY, Guardian Angel
48693 Registered Users
Forum Statistics
Forums61
Topics91,352
Posts621,873
Members48,693
Most Online5,661
May 23rd, 2018
Today's Birthdays
dbman, Irving Ross, rburris389, RHS, wood, XetaTech
Top Posters(30 Days)
dexman 36
Yoda 15
Free Voip phone with every line!
FREE Voip Phone - Click Here!
RESPONSIVE WEBSITE DEVELOPMENT
Ad Spot for sale!
Free Phone Repair Diagnostic
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2018
Trusted Partners
Sitemap