|
Joined: Jan 2007
Posts: 29
Member
|
OP
Member
Joined: Jan 2007
Posts: 29 |
Can remote access to a 200ICP be done safely via ProComm or Hyper Terminal as it is on a 200ML/EL? I have always been told not to make changes on a 3300 with ProComm as you would on a 2K even though the forms are there - it's ok to look at maintenance, but programming changes should ONLY be made through a browser. Does this also apply to a 200ICP?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2006
Posts: 1,136
Member
|
Member
Joined: Aug 2006
Posts: 1,136 |
@00 ICP is fine - just that getting a modem to work consistently is sometimes difficult. But programming is fine.
|
|
|
|
Joined: Jan 2007
Posts: 29
Member
|
OP
Member
Joined: Jan 2007
Posts: 29 |
Suprisingly enough, the modem works fine on this system (I think I lucked out!) - I just wanted to make sure it was safe to make changes before I got into CDE. Thanks for your quick response.
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
So, E-mail me the make & model of the modem at your convenience, please. Thanks, John C. (Not Garand)
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Joined: Jan 2007
Posts: 29
Member
|
OP
Member
Joined: Jan 2007
Posts: 29 |
You got it - I'll be back on-site this week or next and will let you know what's out there.
|
|
|
|
Joined: Aug 2006
Posts: 1,136
Member
|
Member
Joined: Aug 2006
Posts: 1,136 |
It would also be beneficial to not only know what brand and type of modem it is, but what the dip switch settings (if any) are and if you could connect to the modem and type in AT&V or ATI4 (depending on the modem) to find out what the programming in the modem is (copy it to a text file). All of those things are pretty necessary to get the correct set up.
|
|
|
|
Joined: Jan 2007
Posts: 29
Member
|
OP
Member
Joined: Jan 2007
Posts: 29 |
Sounds like a lot of issues people have with modems are on exts - this one happens to be on a POTS line (didn't want to get anyones hopes up) - I'll post make/model/settings when I get them.
|
|
|
|
Joined: Oct 2004
Posts: 1,057
Member
|
Member
Joined: Oct 2004
Posts: 1,057 |
Mitel created a document for setting up US Robotics modems. Send me an email and I can reply with the info.
|
|
|
Forums84
Topics94,262
Posts638,693
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
105
guests, and
128
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|