|
|
|
|
Joined: Mar 2009
Posts: 1
Member
|
OP
Member
Joined: Mar 2009
Posts: 1 |
I need to unplug SX50 and move electric plug closer to SX50. I was told to turn off red switch located on left side of a machine. I was also told to replace a battery CR2032 before turning it off. As I had never done this before every help is appriciated!!
Thanks..
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 1,136
Member
|
|
Member
Joined: Aug 2006
Posts: 1,136 |
Might not be a bad idea to replace the battery. It is round and located on the software module that piggy backs on the right side of the card cage. It should be held in place by a thin metal arm that completes the circuit. Replace the battery while the system is plugged in. It might also be a good idea (if you have a printer / Call accounting system) to get a program dump before doing any of that.
|
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
There is the possibility that the software is older and the battery is a '3-legged' device. Tadiran TL5135. Kinda hard to locate, but in either case, you REALLY should replace the battery before turning off the system, as Dane said. John C.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Feb 2008
Posts: 63
Member
|
|
Member
Joined: Feb 2008
Posts: 63 |
Make sure you don't bend the little metal arm that holds the battery in place. This is one of the connections to the battery. If this arm gets bent and won't make good connection you may loose programming when you turn the power off.
Been there and done that!
Would be a good idea to do a data printout first.
|
|
|
|
|
Joined: Apr 2007
Posts: 339
Member
|
|
Member
Joined: Apr 2007
Posts: 339 |
note polarity of battery when you remove existing and install new.
|
|
|
|
Forums84
Topics94,289
Posts638,797
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, justbill),
174
guests, and
291
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
