|
Joined: Oct 2009
Posts: 64
Member
|
OP
Member
Joined: Oct 2009
Posts: 64 |
Here's a good one. I have an SX-20 that keeps showing talk path faults on every other talk path. I've changed out the misc. card with a good one, but still get the faults. When I disable all the odd talk paths, then I can take stations off-hook without dead air. This only leaves me with 6 talk paths. Any suggestions (Other than switching out the CPU) GEN. 503-07 software is good.
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
This can be caused by a station card also, as I recall.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Joined: Feb 2007
Posts: 99
Member
|
Member
Joined: Feb 2007
Posts: 99 |
Bare with me its been a long time since I've done any work on a SX20. When you replaced the misc. card did you reuse the trunk modules? Does it have the trunk expander board with 2 trunk modules?
Do you hold your breath when you power it down?
|
|
|
|
Joined: Oct 2009
Posts: 64
Member
|
OP
Member
Joined: Oct 2009
Posts: 64 |
Found the problem. It was the CPU. It would not report with diagnostics any CPU errors, but when I replaced it, "POOF" it worked just fine. Kept getting AL 41, AL 21,22, etc. nothing indicating the processor. Thanks for the reply's folks.
Thanks
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Probably should have suggested that you pull and reseat every card in the cabinet1st. You might be surprised if you re-install the CPU. Reason? The contact fingers in the card slots are old and tired and dirty.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Joined: Oct 2009
Posts: 64
Member
|
OP
Member
Joined: Oct 2009
Posts: 64 |
The CPU was definitely bad.
Thanks
|
|
|
Forums84
Topics94,262
Posts638,696
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
|
|