|
|
|
|
Joined: Aug 2009
Posts: 14
Member
|
OP
Member
Joined: Aug 2009
Posts: 14 |
Hi, I need assign a static IP address to an E2T card in a 3300 MXerunning MCD 4. It has got an address from the internal DHCP server but this neEds to be turned off.
The Technicians Hand Book explains about connecting via secure telnet to the controller IP address on port 2007 which I can do but it doesn't say how to assign it an address.
Any help would be greatly appreciated.
Thanks
Joe
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 370
Member
|
|
Member
Joined: May 2005
Posts: 370 |
Once you log into the Mitel thru the secure telnet you have to use the command bootChange ( note the Capial C ) and Make your static changes to the E2T and make sure your flags are set to 0X0 ( Static ) 0X40 is DHCP. I believe you will have to reset the E2T for changes to be made. So schedule this when ther eis low traffic.
Let us know
Alex Kroger
Pinnacle Communications Corp
Mitel/Hitachi
Nationwide Hospitality Provider
|
|
|
|
|
Joined: Aug 2009
Posts: 14
Member
|
|
OP
Member
Joined: Aug 2009
Posts: 14 |
All sorted now although it did take a call to mitel support. Through all the documentation and research I did not one thing mentioned the bootChange command.
Thanks for the reply.
Joe
|
|
|
|
Forums84
Topics94,283
Posts638,765
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
148
guests, and
212
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
