|
|
|
|
Joined: Jan 2010
Posts: 2
Member
|
OP
Member
Joined: Jan 2010
Posts: 2 |
Hello,
Thanks for the wonderful forum! I was wondering if anyone knows if a Mitel 3000 system will work if the data (orange) pairs have reversed polarity?
I'm installing the system in a building in which the orange pair has reversed polarity on every block, and I don't want to have to re-punch everything if I don't have to.
Thanks again!
-TJ
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
Just do a turnover in the x-connect from the Mitel 66 block to the building wire 66 block.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
|
Joined: Jan 2010
Posts: 2
Member
|
|
OP
Member
Joined: Jan 2010
Posts: 2 |
Hi,
Thanks for the response.
I ended up trying it on one extension with the wiring reversed. It worked just fine. I played with it quit a bit, and it doesn't seem to be polarity sensitive for the data wires at all.
You can have any combination of correct and "incorrect" wiring, and the CCU seems to be able to match it just fine.
Anyway, just thought I'd post that for future reference.
How much easier can you get then that?
|
|
|
|
Forums84
Topics94,284
Posts638,769
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
142
guests, and
290
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
